The 10 Classiest Vape Pipes

If you’re in the market for a high-end e-pipe experience, then ePuffer’s 629 X Kit should be at the top of your list. It is a draw-activated e-pipe with a solid mahogany base. ePuffer claims its 1.0 micro sub-ohm atomizer helps increase vapor production by 20 percent. This pipe also has a dual-chamber atomizer to prevent e-juice leakage.

On the top of the device, you’ll find a transparent zirconia crystal that lights red when your pipe is in use. If you don’t dig the light-activated effect, ePuffer also offers a black top for stealthier sessions.

Although you’ll pay top dollar for this product, the 629 X is beautifully constructed and offers a consistently smooth vaping experience.

With its black lacquer exterior and LED screen, the SMOK Guardian Pipe III doesn’t look like a traditional wooden pipe. But what this pipe lacks in authentic allure, it makes up for in the customizability department.

If you tap this unit’s control button five times, you’ll see an LED menu appear on the pipe’s top. Hit the power button three times to cycle through various screens and change your vaping experience.

The SMOK Guardian Pipe III has an impressive temperature range of 200–400°F and a maximum wattage of 75. You can also adjust your airflow, use Bluetooth connectivity, and change your coils to nickel, stainless steel, or titanium.

If you’re more concerned with customizing your vaping experience than traditional pipe aesthetics, the Guardian Pipe III might be for you.

If you want a high-end ePuffer experience without paying for the 629 X, you might prefer their Hybrid 609 model. This button-operated pipe vape has a solid wood finish and is designed to work with cartomizers. Although you could also use e-juice, you’ll have to pay extra for an adaptable liquid tank.

Unlike the 629 X, the 609 is not draw-activated. However, ePuffer says the device should heat up within a few seconds of pressing the power button. The 609 is also missing the 629 X’s dual-chamber atomizer, which means it’s more prone to leakage.

Although it’s not as high quality as the 629 X, the 609 model offers an affordable premium vaping experience, so it depends on your lifestyle and preferences on which is more for you.

If you’re looking for a classy vape pipe to go along with your CBD or Delta-8 THC cartridges, look no further than Hemper Bush Pipe Vape Battery. These are designed to adapt to any 510 threaded cartridge – the most commonly used in both the cannabis and nicotine vaping industries.

With that said, this is one of the most convenient pipes on our list. A great purchase for those new to vaping or simply looking to give it a try (as it only costs $19.99).

There are three voltage settings, depending on the contents of your cartridge. These include 3.0v (Green) to 3.7v (Blue) to 4.2v (Red). The only major downside to this vape is it’s smaller than others on our list – in turn, it’s likely easier to lose and potentially more vulnerable to breaking.

If you’re really looking to impress your friends, Epipe’s Gandalf is the way to go. However, be aware, this Lord of the Rings-inspired piece comes at a hefty price: € 270.00 for the E-pipe and Stem or € 344.60 (E-pipe, Stem, and Stand) for the complete package.

Still, if you opt to purchase this pipe, you’ll know exactly where your money’s going. The quality is unmatched, even compared to other pipes on this list.

Furthermore, it’s designed with an 18650 battery that provides you with a standard 3.7 volts. This allows for optimal performance for as long as the battery life continues – making it an ideal modern solution. This allows for any 510-thread to work on this pipe, meaning you can attach a variety of different products to this piece.

On top of that, beyond performance, it simply looks awesome!

Customers who like corncob pipes must check out KamryTech’s K1000 Plus e-pipe. This 30 W sub-ohm device comes with a tank, battery holder, and drip tip that you can quickly assemble into a cool corncob e-pipe. Simply hit the main button five times to turn on the K1000. Next, hold the central button, and enjoy!

Although it’s not difficult to assemble this device, some users dislike filling e-juice from the bottom. Others have also complained that charging the unit takes a while.

On the plus side, the K1000 gets up to 30 W, isn’t all that expensive, and can fit 3.5ml of e-juice in its glass tank. As a bonus, since this pipe has a flat bottom, you don’t need a stand to set it down on when you’re finished with it.

The Joyetech Elitar Pipe is remarkably similar to the SMOK Guardian Pipe III. Both devices are available in sleek black designs and have LED screens on the top. These pipes also have maximum output wattages of 75 W, and they can adapt to nickel, titanium, and stainless-steel coils.

Unlike the SMOK unit, Joyetech’s pipe has two buttons that make it easier to customize your vape session. We should note, however, this product doesn’t have Bluetooth connectivity.

One issue some people have with Elitar is its battery door. Although this door is magnetic, it can be tricky to shut completely. That being said, the Elitar is an excellent choice for vapers who want a futuristic pipe with a ton of customizable functions.

One of the most hyped e-pipe mods on the market is the F30 by Ewinvape. With a faux wood finish, this vape pipe mod looks like the real deal, and it’s compatible with any 22mm atomizer.

On the F30’s tip, you’ll find an LED screen along with three buttons you can use to adjust the wattage. You can also easily adjust the airflow at the bottom of this e-pipe.

Since you aren’t paying top dollar for this mod, please don’t expect ePuffer quality. For instance, the primary material on this e-pipe is plastic. Also, since this vape pipe mod was designed to snap off easily, it might not feel as sturdy as other models.

However, if you’re looking for an affordable way to test an e-pipe, then the F30 offers a whole lot of features for an unbeatable price.

The Kamry Turbo K is everyone’s favorite pocket-friendly e-pipe. Unlike the full-bent designs listed above, the Turbo K has a unique curved body that somewhat resembles an Indigenous pipe.

While the Turbo K has a shaman aesthetic, there’s nothing mystical about this pipe’s tech specs. Each of these pipes has a 1000mAh internal battery and a 2ml tank. To operate this unit, simply click the top button five times and hold when you’re ready to vape.

Although the Turbo K might not look as iconic as a full-bent model, it is affordable, portable, and simple to use.

Coming in a marble finish, the Westminster E-Pipe Automatic 605 V2 Kit is designed for those looking for a long-lasting classy pipe. This is the third generation of this high-tech non-flammable product, and it really shows when you take a deeper look at this build.

Through Westminster’s patented Cartomizer design, users can expect a longer-lasting battery life that stretches to the use of the tank (and contents inside). Speaking of, each pipe comes with a 2mL tank which is pretty standard for vaporizers.

While such a product is designed for nicotine e-juices, you’ll likely find that CBD e-liquids are also an optimal solution in this piece.

The performance uses automatic drawbacks which we were personally impressed by. Beyond the solid puff we got from each toke, this feature really made it feel like you were smoking a classy tobacco pipe.

Call us shallow, but these vape pipes were not picked for their outstanding efficiency or power – it was purely aesthetics. So, if you think vaping is something more than just a practical way to dose CBD, check out our selection and get that steampunk flair going!